Shaking incubator for cell culturing MSLSI01

Shaking incubator for cell culturing MSLSI01
$9,999.00

Availability: In stock

Model No:MSLSI01 Brand:Medsinglong Service:Medsinglong after-sales support. Contact us: Cindy@medmsl.com Keywords:Shaking incubator
OR
Description

Details

Shaking incubator | Shaking Equipment for slae MSLSI01

Shaking incubator MSLSI01

New Shaking incubator technical indicators and requirements

2.Temperature Control range: RT 5~60.0℃;Speed Control range:30~300 r/min;
Time Range:0~999min or 0~999Hour;
3.Temperature display basic error value:< 0.5%;
Speed display basic error value:±1 r/min;
4.Working Condition:Input Power:220V±10%; ambient temperature:5~60℃;
Shaking incubator MSLSI01 for slae

Use Shaking incubator Temp & parameter setting

1.Press“SET”button,Entry Segment Setting Status,Segmet Light flashing,reach target
segment through shift, increase & decrease button(1~10);Long Press “SET” Button save & exit.
2.Press “SET”twice,Entry into Temperature parameter menu,Temp light flashing,
reach target temperature through shift increase & decrease button(1~10);Long Press “SET”
Button save & exit.
3.Press “SET”3s Temp Display“Lc”,Speed Area Display Password,Preset Password through shift,
increase & decrease button.Press “SET” work and run,It will entry into Temperature Menu ,othervise
it will back to current working status. Long Press “SET” Button 3s save & exit.
Speed parameter setting
1.Press “SET” three times,Speed Area Light Falshing,through shift increase & decrease button;
Long Press “SET” Button save & exit.
MSL Shaking incubator

Cheap Shaking incubator Speed parameter menu:

1.Long Press “Check”button 3s (motor without running ,Temperature area display“Lc”,
Speed area display password,through shift increase & decrease button;Long Press “SET”
Button save & exit. Press“Check”Button,It will entry into Speed parameter menu,othervise it
will back to current working status. Long Press “Check” Button 3s save & exit.
Time Setting
Press“Time”Button,Time area light flashing,through shift increase & decrease button;
Long Press “Time” Button save & exit.
Cheap Shaking incubator
Operation
RUN/ STOP Function
Press RUN/STOP Button,Display RUN,Motor &Temp Running, Press again,
Display STOP,Motor &Temp Stopped
3.Timing Function
Preset time“0”,without timing function,control system continuous working ;If Preset
(for example:3min),The timer will Count down,once time over,Time area display “End”,
BUZZER,Press RUN/STOP button,Run again.
Use Shaking incubator
Note:During RUNING STATUS TO CHANGE THE TIMEER SETTING,IT WILL WORK
AS NEW TIME SETTING.
5.Power Down/ memory function:
1)no:motor will not work as previous setting once the power back.
2)yes: motor will work as previous setting once the power back.
New Shaking incubator

 

Contact Information

Contact Information

  • *
  • *
  • *
  • *
  • *
  • *
PDF Download
test content
FAQ

1. How long is the warranty?
2 years.

2. Can I choose other language?
It depends. Most machines have multiple language.

3. What certificate do you have?
Generally, most machine have CE, ISO, FSC. Some have FDA.

4. How long is the delivery?
About 4 days

5. How can I pay?
Paypal, Western Union, T/T, L/C, Trade Assurance, Money Gram etc. are accepted.

1. Can the medical incinerator burn dead body?
No, It is a non-hazardous treatment device commonly used in medical waste, such as blood cotton, needles, and disposable syringes

2. Can a medical incinerator use gasoline?
No, only diesel or natural gas liquefied gas.

What type of gas does the body cabinet compressor use?
Secop's compressors use R134a refrigerant. The refrigerant is universal and easy to buy. The refrigerant used in domestic compressors is r12, which is easy to purchase in the domestic market.

4. Does the body cabinet need to be installed before using?
No need to install. Plug it in directly. But if it is shipped by air, the refrigerant needs to be pumped out and refilled before use.

5. Is there an analysis segment for the human body analyzers MSLCA01, MSLCA02, MSLCA03, MSLCA04?
The MSLCA01 Body Analyzer does not have this function, MSLCA02, MSLCA03, MSLCA04 have the function of segmental fat, segmental moisture analysis, edema coefficient analysis, detailed body water analysis, intracellular water, extracellular water, and body water status.

6. Can the body analyzer be OEM?
It is possible when it reaches a certain amount. At present, we are all shipping from neutral machines.

7. What languages ​​does the body analyzer support?
MSLCA01 supports French, Italian, German, Portuguese, Spanish, Russian, English, Simplified Chinese, and Traditional Chinese. MSLCA02, MSLCA03, MSLCA04 support German, English, Simplified Chinese, Traditional Chinese. Lhe language needs to be confirmed in advance.

8. Can an endoscope camera connect to a monitor?
Yes, you can choose different size: 15 inches, 21 inches, 24 inches and 26 inches.

9. How often does one need to change oil in vacuum pump?

The vacuum pump oil is changed once every six months, and the pump oil is changed for 200 hours according to the frequency of use. If the catch water is overloaded, there will be a small amount of water to the vacuum pump part and then the cold trap, so the pump oil must be changed.

10. How high the degrees can the MSLFV02 refrigerator do?
Cold trap -40 degrees, plate temperature -35 degrees. This model is used for food and vegetables.

11. Can endoscopes add an extra camera?
Yes, we generally do not advise customers to purchase two cameras because the camera is the most important component of the entire device, so the price is relatively high. Of course, if customers want to buy, it is ok.

Relevant articles
test content
Inquire Now

Contact Information

Contact Information

  • *
  • *
  • *
  • *
  • *
  • *

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.