Mobile c-arm x-ray machine price&manufacturer in china-MSLCX06

Mobile c-arm x-ray machine price&manufacturer in china-MSLCX06

Availability: In stock

Model No:MSLCX06 Brand:Medsinglong Service:Medsinglong after-sales support. Contact us: Keywords:c-arm x-ray machine price


High Frequency C-arm X-ray Machine MSLCX06

1.C-arm X-ray machine
2.Mobile x-ray unit
3, X-ray machine
4High Frequency

                          c-arm x-ray machine

c-arm x-ray machine price

Part name MSLCX06 MSLCX05  
Configuration High Frequency Inverter from IMD,Italy.    
  X-ray Tube and High Voltage Generator from IMD, Italy.With 1) Tube Window Shield    
  9 Inches 3 Fields of View Image Intensifier from Thales, France.    
  CCD Camera Fully Imported From Japan    
  X-ray LCD Monitor and Controller.With 1) Fluoroscopy Foot Switch   2) Radiography Hand Switch    
  Image Processing System    
  With 1) two 14" High Grey Scale Professional Medical Monitors,2) Mobile Console    
  Electrical Stand and C-arm.With 1) Collimator   2) X-ray Grid Imported From Korea    
  Tube Voltage:110kV    
  X-ray Tube and High Voltage Generator    
  Tube: fixed anode 3.5kW,Small Filament:0.6mm,Large Filament:1.5mm Tube: rotating anode 5.0kW, Small Filament:0.3mm,Large Filament:0.6mm  
  Thermal Capacity and Heat Dissipation:667KHU(500KJ),air cooling and oil cooling Thermal Capacity and Heat Dissipation:800KHU(600KJ), Air Cooling and Oil Cooling  
  Filtration:Inherent filtration:1.8mmAl,Added filtration:1mmAl×2.    
9-Inch 3 Fields of View Image Intensifier Input Screen Size:23/16/1cm    
  3 Fields of View Transfer:9"/6"/4.5"    
CCD Camera Image System:625 lines/50Hz;    
  SNR(Signal Noise Ratio): ≥45 dB    
X-ray LCD Monitor and Controller LCD Display, Intelligent Operation    
  Fluoroscopy, Radiography kV Range:40~110kV(Step length: 1/10kV) Fluoroscopy, Radiography kV Range:40~120kV(Step length: 1/10kV)  
  Continuous Fluoroscopy Current Range: 0.2~4mA(Step length: 0.1mA)    
  Enhanced Fluoroscopy Current Range:0.2~8mA(Step length: 0.1mA)    
  Current Time Product: Audible alarm after 3-minute working but the machine is still operational. It will stop automatically after 2 minutes. Manual Reset    
  Radiography Current Control:20~60mA section Radiography Current Control:20~80mA section  
  Radiography mAs Control:1~120mAs Radiography mAs Control: 1~150mAs  
Image Memory Image Matrix: 768×576, Grey Scale:10 levels    
  Image Storage:8 frames    
  Denoise:4 levels,Maximum to 8 frames    
C-arm Stand C-arm sliding along the arc: -30°~0~90°    
  C-arm vertical raising or lowering: Linear guides design:40mm(Electrical)    
  C-arm rotation around the horizontal axis: ±180°    
  C-arm horizontal extension:200mm    
  C-arm range of oscillation:±15°    
  Distance between focus and image intensifier:950mm    
  Depth in arc and opening:700mm,750mm    
  Collimator: electric double blades+ iris blades    
No Equipment Name Unit Quantity
1 High Frequency Inverter set 1
2 X-ray Tube and High Voltage Generator set 1
3 View Image Intensifier set 1
4 X-ray LCD Monitor and Controller set 1
5 CCD Camera set 1
6 Image Memory &

Contact Information

Contact Information

  • *
  • *
  • *
  • *
  • *
  • *
PDF Download
test content

1. How long is the warranty?
2 years.

2. Can I choose other language?
It depends. Most machines have multiple language.

3. What certificate do you have?
Generally, most machine have CE, ISO, FSC. Some have FDA.

4. How long is the delivery?
About 4 days

5. How can I pay?
Paypal, Western Union, T/T, L/C, Trade Assurance, Money Gram etc. are accepted.

1. Can the medical incinerator burn dead body?
No, It is a non-hazardous treatment device commonly used in medical waste, such as blood cotton, needles, and disposable syringes

2. Can a medical incinerator use gasoline?
No, only diesel or natural gas liquefied gas.

What type of gas does the body cabinet compressor use?
Secop's compressors use R134a refrigerant. The refrigerant is universal and easy to buy. The refrigerant used in domestic compressors is r12, which is easy to purchase in the domestic market.

4. Does the body cabinet need to be installed before using?
No need to install. Plug it in directly. But if it is shipped by air, the refrigerant needs to be pumped out and refilled before use.

5. Is there an analysis segment for the human body analyzers MSLCA01, MSLCA02, MSLCA03, MSLCA04?
The MSLCA01 Body Analyzer does not have this function, MSLCA02, MSLCA03, MSLCA04 have the function of segmental fat, segmental moisture analysis, edema coefficient analysis, detailed body water analysis, intracellular water, extracellular water, and body water status.

6. Can the body analyzer be OEM?
It is possible when it reaches a certain amount. At present, we are all shipping from neutral machines.

7. What languages ​​does the body analyzer support?
MSLCA01 supports French, Italian, German, Portuguese, Spanish, Russian, English, Simplified Chinese, and Traditional Chinese. MSLCA02, MSLCA03, MSLCA04 support German, English, Simplified Chinese, Traditional Chinese. Lhe language needs to be confirmed in advance.

8. Can an endoscope camera connect to a monitor?
Yes, you can choose different size: 15 inches, 21 inches, 24 inches and 26 inches.

9. How often does one need to change oil in vacuum pump?

The vacuum pump oil is changed once every six months, and the pump oil is changed for 200 hours according to the frequency of use. If the catch water is overloaded, there will be a small amount of water to the vacuum pump part and then the cold trap, so the pump oil must be changed.

10. How high the degrees can the MSLFV02 refrigerator do?
Cold trap -40 degrees, plate temperature -35 degrees. This model is used for food and vegetables.

11. Can endoscopes add an extra camera?
Yes, we generally do not advise customers to purchase two cameras because the camera is the most important component of the entire device, so the price is relatively high. Of course, if customers want to buy, it is ok.

Relevant articles
test content
Inquire Now

Contact Information

Contact Information

  • *
  • *
  • *
  • *
  • *
  • *

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.