Medical elastomeric infusion syringe pump in examination therapy equipments with CE approved-MSLIS01
Stackable single syringe sets MSLIS01
1.With maximum 8 channels stackable
2.Unique Voice Alarm system
3.Large LCD scree
Elastomeric infusion syringe pump Features & Functions
1.Freely Stackable: Users can freely stack one syringe pump onto another to provide multiple Solutions,which have a wide range of clinical applications.
2.Stackable to be the maximum 8 channels.
3.Transfer the message between the Nurse-call System and the pumps.
4.Three working modes: rate mode,time-volume mode,dosage-weight mode.
5.Unique Voice Alarm system and accurate injection rate make the injection process safer and more reliable.
6.Have store many brands syringes,automatically calibration and compatible with any brand syringes.
7.Pca infusion pum.
8.Large LCD screen displays working status.
9.KVO and Bolus functions.
infusion syringe pumps Technical parameters:
Unique Voice Alarm system
The device triggered the voice prompt and stop injection automatically when there is any malfunction, making the infusion process safer and more reliable.
Flow rate :50ml syringe:0.1~1500ml/h; 30ml syringe:0.1~900.0ml/h; 20ml syringe:0.1~600.0ml/h; 10ml syringe:0.1~300.0ml/h
The range of limiting volume : 0~999.9ml
The range of injected volume : 0~9999.9ml
Accuracy of flow rate Within ± 3% (Choose the syringe of specified manufacturer correctly. This accuracy of flow rate is not including the errors of syringe itself.)
Purge rate: Purge rate of 50ml syringe:1500ml/h; Purge rate of 30ml syringe:900.0ml/h; Purge rate of 20ml syringe:600.0ml/h; Purge rate of 10ml syringe:300.0ml/h
Alarm and warms : The pump can give out alarming when injection soon finish, injection finishing, injection of limited amount finished, injection is blocked, syringe falls off, syringe is improperly installed, setting error, AC power has been pulled out,
low battery and so on.
Injection blocked :Choose in the three kinds of occlusion alarm pressure according to the clinical requirements(High, Medium, Low)
KVO rate: 1ml/h
Fuse specification : F1AL/250V ,two fuses(installed inside pump)